Bosch Appliances D1265 owner manual Change Relay CMD + 5 +, Change Passcode CMD + 5 +

D1265 Owner's Manual Part III: Advanced Commands

Change Relay (CMD + 5 + 4)

Your security company might program relays for automatic control and/or control from your keypad of devices such as premises lighting or entry gates. Contact them for further information regarding the use of relays in your security system.

1.Ensure your keypad shows idle disarmed text.

2.Press the CMD button. The display shows *System Command*.

3.Press the 5 button and then the 4 button.

If you prefer, you might use the function list in place of Steps 2 and 3 to initiate this function.

Press the Menu button to enter the function list.

Press the Next button repeatedly.

When you reach the CHG RELAYS button, press it.

4.The keypad display changes *Change Relay* Enter relay number.

Valid entries are 1 to 128, depending how the system is configured.

Enter the relay number then press the ENTER button.

5.If the relay is valid and turned off, the display changes to Change Relay* Relay 123 is currently off.

(123 is used as an example.)

Press the Turn on button to turn on the relay.

6.If the relay is valid and turned on, the display changes to Change Relay* Relay 123 is currently on.

(123 is used as an example.)

Press the Turn off button to turn off the relay.

7.The display returns to the *Change Relay* Enter relay number.

Press the Exit button to return to idle text.

The on-board relays use the following numbers:

Relay A	250
Relay B	251
Relay C	252.

Change Passcode (CMD + 5 + 5)

Description

Use this function to change your personal passcode without assistance from the security company.

Before you begin:

Choose a new passcode three to six digits long. If you choose a passcode with the same digit in consecutive order (for example “33” in 334697), take care when entering it.

To avoid conflicting with other passcodes and duress codes, your system will not let you change passcodes to an existing passcode or to within plus or minus 2 of an existing passcode. For example, if 1234 were an existing code, your system would not let you change your code to 1232, 1233, 1234, 1235, or 1236.

Using Change Passcode

1.Ensure your keypad shows idle disarmed text.

2.Press the CMD button. The display shows *System Command*.

3.Press the 5 button and then the 5 button.

Bosch Security Systems, Inc. 9/10 F01U169130-02 47