Bosch Appliances D1265 Remote Program CMD + 4 +, Description, For systems without a phone number

D1265 Owner's Manual Part III: Advanced Commands

6.When the transmission is complete the keypad shows Report sent for 5 sec.

If the Exit button is pressed before 5 sec have elapsed, idle text is shown.

The display returns to idle text.

7.If the test (or status) report does not successfully transmit to the central station, the keypad might sound a trouble tone and display Comm Fail Route Grp# (# = 1-4) after numerous unsuccessful attempts.

Remote Program (CMD + 4 + 3)

Description

This function allows the user to initiate Remote Programming Software (RPS) sessions. When the phone is ringing at the control panel, the user initiates this function to have the control panel seize the line.

Your security company can remotely program your security system using the telephone line to which your control panel is connected. Typical remote programming functions include: changing personal passcodes, changing entry/exit delays, resetting the system clock/calendar, and adding/deleting system arming commands.

Your security company might ask you to follow the steps below to begin a remote programming session. The time it takes to program the control panel is dependent on the number of changes made to the program.

You’ll notice that two sets of procedures are presented. The one you use depends upon whether your system has a pre-programmed telephone number in its memory.

My system does not have the RPS phone or the RPS network configured.

For systems without a phone number

1.Ensure the display shows disarmed idle text.

2.Call this phone number:

This number is designated for the RPS.

You must make the call using the telephone located at:

___________________________

3.Identify yourself and your premises (account number, name, address, etc.) and advise the operator of the services you wish to have performed. When the operator instructs you, proceed to Steps 4 through 6.

4.Press the CMD button. The display shows *System Command*.

5.Press the 4 button then the 3 button.

6.Advance the menu (if necessary) and select the Allow Answer option.

Bosch Security Systems, Inc. 9/10 F01U169130-02 35