Bosch Appliances D1265 owner manual Bypass a Point CMD +, Description, Using Bypass a Point

D1265 Owner's Manual Part III: Advanced Commands

User Passcodes A three to six digit number entered at a keypad to access the system.

Bypass a Point (CMD + 0)

Description

This command allows you to bypass points that you do not want included in the system. Points that are not included in the system do not detect intruders and cannot send any reports. You can bypass points when an area is disarmed. Bypassing a point reduces the level of security and should be used with discretion. Points remain bypassed until you unbypass them, or some points might return when the area is disarmed (refer to Unbypass a Point (CMD + 0 + 0) on page 33).

You could use CMD 0 to leave a window open over night without initiating an alarm. Also refer to Turning On the System (Arming) With Doors or Windows Open on page 17.

Using Bypass a Point

1.Ensure your keypad shows idle text.

2.Press the CMD button. The display shows *System Command*.

3.Press the 0 button.

If you prefer, you might use the function list in place of Steps 2 and 3 to initiate this function.

Press the Menu button to enter the function list.

Press the Next button repeatedly.

When you reach the Bypass a Point button, press it.

4.You might be prompted for your passcode. It appears on the display as asterisks (*).

5.The display changes to show Enter point number or press next key.

6.If a digit is pressed, the display shows Enter point number: #. As soon as a digit button is pressed, the display changes to Entering point number (# is the point number entered).

If you know the point number you wish to bypass, enter the number and press the ENTER button.

If you don’t know the number of the point you wish to bypass, you can view the list of devices that can be bypassed by pressing the Next button.

Continuously pressing Next scrolls through the available points that can be bypassed.

When the point text of the point you wish to bypass appears, press the Bypass button.

P3 ENTRY DELAY is not bypassed indicates the point is not bypassed and the option is given to bypass it.

One of the following messages shows (P3 ENTRY DELAY is used here as an example):

Bosch Security Systems, Inc. 9/10 F01U169130-02 31