Bosch Appliances D1265 Part IV: Multi-AreaUse, Working with Multiple Areas from a Single Keypad

D1265 Owner's Manual Part IV: Multi-Area Use

Part IV: Multi-Area Use

Working with Multiple Areas from a Single Keypad

Each of the functions described in the preceding section on Advanced Commands is presented as though your system includes only one area. If your system includes more than one area, it can be set up in one of two ways by the installing company:

Each keypad only has access to the local area to which it is assigned, or

Each keypad might access either some or all areas beyond the one to which it is assigned. This factor is referred to hereafter as keypad scope.

If your keypad allows access to areas other than the local area (that is to say, has scope in other areas), then the keypad limits your access to those areas within the keypad scope and for which your personal passcode has authority.

Given that you have access to areas beyond the local area, the means of accessing the various system functions depends upon the specific function.

For some functions, the keypad allows you to select the area (or point) in which to perform the function. These “selectable” functions are:

Disarm

Master Arm Area

Bypass A Point

Unbypass A Point

Another group of functions might automatically work in all areas in which you have passcode authority and which are within the scope of the keypad. These are:

Turning Off Multiple Areas with a Passcode

Disarm All

Master Arm All

View Alarm Memory

Walk Test

Reset Sensors

Add Passcodes

Fire test

View Point Status

View Area Status

Some functions might be area-specific. To perform these functions, you must first use the Move To Area function (CMD 50) to gain access to the desired area. Once in the desired area you can perform the functions you wish. Area-specific functions include:

Perimeter Instant (Perimeter On Instant)

Perimeter Delay (Perimeter On Delay)

Perimeter Partial (Perimeter On Partial)

Extend Closing

Watch Mode

CMD 7

CMD 9

A last group of functions don’t relate to specific areas and are thus system-wide. These are:

Send Report

Remote Program

Change Time/Date

Change Skeds

Delete Passcodes

Change Relays

Change Passcodes

Print Log

View Log

View Area Status

Use this function when you need to know the status (whether armed or disarmed) of areas other than the one you’re in.

1.Ensure your keypad shows idle disarmed text.

2.Press the Menu button to enter the function list.

3.Press Next repeatedly until you reach the View Area Status button.

Press the button.

4.The display changes to show on the top line the area name and the current status on the second line.

Pressing the Next button changes the display to the next area and remain for 20 sec or until the Next button is pressed for the next area. If the time has elapsed, the display returns to idle text.

Pressing the Previous button changes the display to the previous area.

5.Press the Exit button to return to idle text.

60 Bosch Security Systems, Inc. 9/10 F01U169130-02