Bosch Appliances D1265 Unbypass A Point CMD + 0 +, Description, Using Unbypass a Point

D1265 Owner's Manual Part III: Advanced Commands

Unbypass A Point (CMD + 0 + 0)

Description

Unbypassing a point is a way to return a bypassed point to the security system so that it can once again respond to trouble and alarm conditions.

Using Unbypass a Point

1.Ensure the display shows disarmed idle text.

2.Press the CMD button. The display shows *System Command*.

3.Press the 0 button twice.

If you prefer, you might use the function list in place of Steps 2 and 3 to initiate this function.

Press the Menu button to enter the function list.

Press the Next button repeatedly.

When you reach the Unbypass a Point button, press it.

4.You might be prompted for your passcode. It appears on the display as asterisks (*).

5.The display changes to show Enter point number or press next key.

6.If digits are pressed, the display shows Enter point number: #. As soon as a digit button is pressed, the display changes to Entering point number (# is the point number that was entered).

If you know the point number you wish to unbypass, enter the number and press the ENTER button.

If you don’t know the number of the point you wish to unbypass, you can view the list of devices that can be unbypassed by pressing the Next button.

Continuously pressing Next scrolls through the available points that are currently bypassed.

When the point text of the point you wish to unbypass appears, press the Unbypass button.

One of the following messages shows (P3 ENTRY DELAY is used here as an example):

P3 ENTRY DELAY is now bypassed indicates the point was successfully bypassed.

Invalid point Please try again indicates that the entered point doesn’t exist and the display returns to allow another point to be entered.

Bosch Security Systems, Inc. 9/10 F01U169130-02 33