Bosch Appliances D1265 owner manual Special Alerts CMD + 7 and CMD +, Description, Using CMD

D1265 Owner's Manual Part II: System Commands

5.The display prompts the user to exit the area and starts counting down # seconds to arm the system.

Special Alerts (CMD + 7 and CMD + 9)

Description

Commands 7 and 9 can be programmed to respond to specific situations that might need immediate attention. They might also be used to send a silent alarm to your security company without sounding an alarm signal on the premises. Check with your security company for the options they offer.

Using CMD 7

# is the number of sec remaining in the countdown.

6.When exit delay time expires and the system turns on, the display shows:

7.To disarm, enter your personal passcode and press ENTER.

1.Ensure your keypad shows idle text.

2.Press the CMD button. The display shows *System Command*.

3.Press the 7 button.

If you prefer, you might use the function list in place of Steps 2 and 3 to initiate this function.

Press the Menu button to enter the function list.

Press the Next button repeatedly.

When you reach the User Command 7 button, press it.

4.Your Command 7 special alert has been programmed to:

notify your alarm company

ring a bell on your premises

display at your keypad

Description:

_________________________________________

_________________________________________

28 Bosch Security Systems, Inc. 9/10 F01U169130-02