Bosch Appliances Perimeter Partial CMD +, D1265 | Owners Manual | Part II: System Commands

D1265 Owner's Manual Part II: System Commands

If you prefer, you might use the function list in place of Steps 2 and 3 to initiate this function.

Press the Menu button to enter the function list.

Press the Next button repeatedly.

When you reach the Watch Mode button, press it.

4.The display briefly shows Watch Mode is now off.

The display returns to show idle text.

Perimeter Partial (CMD + 8)

Partially Turn On the Perimeter

Description

This function is used to turn on the perimeter of your building while selected portions of the perimeter remain turned off. Perimeter points that are not secure (faulted) when this function is entered are automatically bypassed and are not included in the system. This function will not turn on the interior of your building. Entry/exit delays are provided with this arming command.

Use this function in residential systems to turn on the front of your house while the interior and the rear perimeter doors are left turned off, giving you freedom of movement between the house and patio.

In commercial systems, when you need access to the large overhead doors to receive deliveries, using this function allows you to keep the rest of the building perimeter armed.

Using Perimeter Partial

1.Ensure the display shows disarmed idle text.

2.Press the CMD button. The display shows *System Command*

.

3.Press the 6 button.

If you prefer, you might use the function list in place of Steps 2 and 3 to initiate this function.

Press the Menu button to enter the function list.

Press the Next button repeatedly.

When you reach the Perimeter Arm Part button, press it.

Bosch Security Systems, Inc. 9/10 F01U169130-02 27