Bosch Appliances owner manual Security System Glossary, D1265 | Owners Manual | Appendix

D1265 Owner's Manual Appendix

Security System Glossary

Area	A group of detection devices
	connected to your security system.
Arm	To turn on your controlled points
	(burglar detection devices). When an
	area is armed and a controlled point
	trips, an alarm occurs or entry delay
	begins. When an area is disarmed,
	faulting controlled points will not
	generate alarms.
Authority	Your security company or security
Level	representative assigns an authority
	level to your passcode. The authority
	level determines what keypad
	functions you can execute.
Bypass	Selectively remove points from the
	security system. You might bypass a
	point in order to arm the perimeter
	with a window open.
Central	A facility where trained personnel
Station	monitor your security system 24 hours
	a day. Your security system might be
	programmed to contact the central
	station during alarm conditions,
	enabling central station personnel to
	dispatch the proper authorities.
Closing	A report your system can be
Report	programmed to send to the central
	station indicating that an area has been
	armed. Opening and closing reports
	are commonly used by commercial
	accounts.
Function	A list of functions programmed by
List	your security company. They can
	perform most keypad functions with
	only two or three button presses.
Entry	A programmed delay of system alarm
Delay	response, which allows you to enter an
	armed area through the correct point
	and disarm the area. If you don’t
	disarm before the delay time expires,
	the system begins an alarm response,
	which might include reports to the
	central station.

Exit Delay	A programmed delay of system alarm
	response, which allows you to exit
	after arming an area. If you don’t exit
	before the delay time expires, entry
	delay begins. You must disarm the
	system. If you don’t disarm before
	the delay time expires, the system
	begins an alarm response, which might
	include reports to the central station.
Faulted	A point that is not normal (a door or
Point	window is open).
Force Arm	To turn on (arm) the security system
	even though one or more points are
	faulted. Force arming bypasses the
	faulted points.
Idle Text	The security system shows idle text at
	keypads when it is not performing a
	user-requested function. Idle text
	shows the arming status of the system.
Master	To turn on (arm) both interior points
Arm	and perimeter points.
Menu	A list of functions you execute from a
	keypad.
Opening	A report your system can be
Report	programmed to send to the central
	station indicating that an area has been
	disarmed. Opening and closing reports
	are commonly used by commercial
	accounts.
Perimeter	An arming command that arms only
Arm	the perimeter points.
Point	A detection device or group of devices
	connected to your security system.
	Points display individually at the
	keypad with custom text. The text can
	describe a single door, motion sensor,
	smoke detector, or an area such as
	UPSTAIRS or GARAGE.
Relay	Your system might have relays
	programmed to provide control of
	devices such as premises lighting or
	entry gates. Your security company
	programs relays for automatic control
	and/or control from your keypad.
Trouble	A service condition that needs to be
	corrected, such as a broken wire

Bosch Security Systems, Inc. 9/10 F01U169130-02 89