Testing Your System | |
|
|
EN 30
10.5Event History Readback
The History Buffer stores the last 400 events in memory. The text keypad can display all of these events. The LED keypad only displays the zones (1 to 16) that alarmed since the last Event History Readback. If you perform this test from a Master keypad, the keypad must be in Single Partition Mode. The RF3341 keypad cannot display history events.
Table 29: Event History Readback
|
|
|
|
Type of Test | Command Sequence | What Happens | What To Do |
|
|
|
|
Event History | [PIN][#][8][9] | • The last event to take place is displayed. * | • Scroll through the events |
Readback |
| • The zone LEDs flash for any zones that alarmed | using the [9], [6], and [#] |
|
| since the last Event History Readback. ** | keys. * |
|
| Note: To read the System Error Displays, follow the | • Exit from Event History |
|
| instructions in Section 9.0 Error Displays. | using [PIN][#]. |
* Text keypad only | ** LED keypad only |
| |
Scrolling through the History Events (Text Keypad Only)
Press [#] to scroll back through the history line by line.
Press [9] to scroll in reverse chronological order by event.
Press [6] to scroll back through the events (toward the most recent) by event.
Each event consists of two or three lines or display screens. The first line/screen is the event title and user. The second line/screen is the date of the event or the change being made. If there is a third line/screen, it will be the date of the change.
To exit the Event History Mode, press the [*] key or wait 20 seconds and the keypad exits automatically.
When performing Event History Readback from a Master keypad, each area displays its own history.
Bosch Security Systems 6/05 4998154961B
