EN 9
6.1.3Perimeter Arming
Perimeter arming is used when someone is still in the building, only the exterior (perimeter) zones must be armed, and an entry/exit delay is in effect.
The green Status LED must be lit and, if using a text keypad, “Ready to Arm” must be displayed. If the green LED is not on or the keypad displays “Not Ready,” you must use other methods to arm the system (refer to Section 6.2.2 Force Arming on page 13 or Section 6.2.3 Zone Bypass on page 14).
Table 5: Perimeter Arming
|
|
|
|
|
Equipment | Command Sequence | What Happens | What To Do | |
|
|
|
|
|
Text Keypad LED | [PIN] | • The red Armed LED flashes. | • Move freely around the | |
Keypad | [Perimeter Only] | • “Perimeter On” is displayed. * | interior. | |
|
| • “Exit Now” is displayed during | • Opening any exterior door | |
|
| * |
| or window triggers an |
|
| • The green Status LED lights steady. | alarm. | |
|
|
| ||
|
| • A single beep sounds. |
| |
|
| • The red Armed LED lights steady when |
| |
|
| the |
| |
|
| • The yellow Perimeter LED lights steady. |
| |
|
| ** |
|
|
|
| • Only exterior protection zones are |
| |
|
| armed. |
| |
RF3341 Keypad | [PIN][#][3] | • The LED flashes indicating a signal was | • Move freely around the | |
|
| sent to your security system. | interior. | |
|
| • Only exterior protection zones are | • Opening any exterior door | |
|
| armed. | or window triggers an | |
|
|
|
| alarm. |
RF3332/RF3332E, |
|
| Not applicable |
|
RF3334/RF3334E |
|
|
|
|
* Text Keypad only |
|
|
|
|
** LED Keypad only |
|
|
|
|
Bosch Security Systems 6/05 4998154961B
