EN 8
6.1.2Perimeter Instant Arming
Use perimeter instant arming to arm only the exterior (perimeter) zones when you remain in the building. An exit delay is in effect, but no entry delay is in effect so an alarm does occur upon entry.
The green Status LED must be lit and, if using a text keypad, “Ready to Arm” must be displayed. If the green LED is not on or the keypad displays “Not Ready,” you must use other methods to arm the system (refer to Section 6.2.2 Force Arming on page 13 or Section 6.2.3 Zone Bypass on page 14).
Table 4: Perimeter Instant Arming
|
|
|
|
|
|
Equipment | Command Sequence | What Happens | What To Do | ||
|
|
|
|
| |
Text Keypad LED | [PIN][No Entry] | • The red Armed LED flashes. | • Move freely around the |
| |
Keypad | [Perimeter Only] | • “Perimeter Inst.” is displayed. * |
| interior. |
|
|
| • “Exit Now” is displayed during | • | Opening any exterior |
|
|
| • The green Status LED lights steady. |
| door or window triggers |
|
|
|
| an alarm. |
| |
|
| • A single beep sounds. |
|
| |
|
|
|
|
| |
|
| • The red Armed LED lights steady when |
|
|
|
|
| the |
|
|
|
|
| • The yellow Perimeter LED lights steady. ** |
|
|
|
|
| • Only exterior protection zones are armed. |
|
|
|
RF3341 Keypad | [PIN][#][2] | • The LED flashes indicating a signal was | • Move freely around the | ||
|
| sent to your security system. |
| interior. | |
|
| • Only exterior protection zones are armed. | • | Opening any exterior | |
|
|
|
| door or window triggers | |
|
|
|
| an alarm. | |
RF3332/RF3332E, |
| Not applicable |
|
|
|
RF3334/RF3334E |
|
|
|
|
|
* Text Keypad only |
|
|
|
|
|
** LED Keypad only |
|
|
|
|
|
Bosch Security Systems 6/05 4998154961B
