Bosch Appliances DS7400XIV4-EXP manual 6.2.4Automatic Arming, 6.2.5Delaying Automatic Arming, En

DS7400XiV4-EXP User Guide 6.0 Day to Day Operations

6.2.4Automatic Arming

EN 15

You can program each area to arm automatically once per day. You cannot program automatic arming from an RF (wireless) keypad. Programming automatic arming in Master Keypad mode affects all areas you have access to. If you program automatic arming in single area mode or from a single area keypad, it affects only the area you are working in.

Do this procedure at a text keypad because no visual clues are provided from an LED keypad.

Table 12: Automatic Arming

Setting the Automatic Arming Time		Notes
[Master PIN][#][0]	You can only set the Automatic Arming Time in Master Programming Mode.
[1]	To enter Automatic Arming Setup programming.
Enter the area number.	• If programming from a Master Keypad that is not in Single Partition Mode, you are
Press [#] to exit.	prompted to enter the area to program.
	• You are allowed to program only the areas to which you are assigned.
	• If programming from a standard keypad or from a Master Keypad in Single
	Partition Mode, skip this step.
Enter a time for each day in	• Programming starts with Sunday. The keypad displays “Sunday –nn : nn”
24-hour clock format	• Enter the time in 24-hour clock format and press the [#] key. If you make a
	mistake, press the [#] key twice to move back to your last entry.
	• Time examples:	12 midnight = 2400#	12 noon = 1200#
		12:01 am = 0001#	12:01 pm = 1201#
		1:00 am = 0100#	1:00 pm = 1300#
		Disabled = 0000#

6.2.5Delaying Automatic Arming

When automatic arming is set, a pre-arming period begins 15 minutes before the system arms automatically to inform occupants that the system is about to arm. The keypad sounders, and any outputs programmed to follow the keypad sounders, pulse five times every minute. During the last five minutes before arming, these sounders are on steady. Once per minute the keypad (text keypad only) displays “Arm in nn min./PIN OFF - extend.”

To delay automatic arming during the pre-arming period, use the appropriate command sequence from the table. To extend the automatic arming time at any time, use the delayed arming feature.

An RF3341 keypad gives no indication of the pre-arming period and cannot be used to delay automatic arming.

Table 13: Delaying Automatic Arming

Equipment	Command Sequence	What Happens	What To Do
Text Keypad LED	[PIN][Off]	The arming time is extended to 30 minutes from	Exit before the new
Keypad		the time you entered the command sequence.	automatic arming time.
		A new pre-arming period begins 15 minutes
		prior to the new automatic arming time.
RF3341,		Not applicable
RF3332/RF3322E,
RF3334/RF3334E

Note: The keypad volume setting also applies to the Auto Arm tone.

Bosch Security Systems 6/05 4998154961B