BM 2610014415
Unpacking And Checking Contents
To avoid injury from unexpected starting or electrical shock during unpacking and setting up, do not plug the power
cord into a source of power. This cord must remain unplugged whenever you are working on the table saw.
FIG. 3 | 4 |
5 | 7 |
|
Model GTS1031 Table Saw is shipped complete in one carton.
Separate all parts from packing materials and check each one with the illustration and the list of Loose Parts to make certain all items are accounted for before discarding any packing material (Fig. 3).
!WARNING If any parts are missing, do not attempt to assemble the table saw,
plug in the power cord or turn the switch on until the missing parts are obtained and are installed correctly.
6
3
2
| TAblE Of lOOSE pARTS |
|
| |
ITEM | DESCRIPTION | QTY. |
| |
1 | Table Saw Assembly | 1 | 1 | |
2 | Rip Fence | 1 |
| |
3 | Table Insert | 1 |
| |
4 | Barrier Guard Assembly | 1 | FIG. 4 | |
5 | 1 | |||
| ||||
6 | Miter Gauge | 1 |
| |
7 | Push Stick | 1 |
|
NOTE: Cut cable tie 8 (for shipping purpose only) located between the saw base and under carriage (Fig. 4). You may cause damage to the blade elevation system if trying to raise blade if cable tie is not removed.
8