Glossary of Terms, Crosscut | Bosch Power Tools GTS1031 specification

BM 2610014415 01-11 E:BM 2610012089 12-10 E 1/10/11 7:17 AM Page 7

	Page		Page
Changing The Blade	.14-15	Using Table Pointer	. . . .24
Attaching The Rip Fence for Use		Work Helpers	. . . .25
& Storage	. . . .16	Using the Miter Gauge	. . . .26
Mounting Table Saw to Workbench	. . . .16	Crosscutting	. . . .27
Adjustments	.17–21	Repetitive Crosscutting	. . . .28
Adjusting 0 & 45 Degree Positive Stops . . .17		Miter Cutting	. . . .28
Adjusting Blade Parallel to the		Bevel Crosscutting	. . . .28
Slot Miter Gauge	. . . .18	Compound Miter Cutting	. . . .28
Aligning Rip Fence	. . . .19	Using the Rip Fence	.29, 31
Rip Fence Pointer Adjustment	. . . .19	Ripping	. . . .30
Table Pointer Adjustment	. . . .20	Non Thru-Sawing	. . . .31
Adjusting Riving Knife	.20-21	Rabbeting	. . . .31
Adjusting Table insert	. . . .21	Dadoing Cutting	.32-33
Basic Table Saw Operation	.22–34	Maintaining Your Table Saw	. . . .34
Safety Power Switch	. . . .22	Clearing Dust Chute/ Scoop	. . . .34
Smart Guard System	.22, 23	Lubrication	. . . .35
Blade Bevel Control	. . . .24	Accessories	. . . .35
Extending Table Extension	. . . .24	Trouble Shooting	. . . .36
Using Rip Fence Pointer	. . . .24

glossary of Terms

WORKpIECE

The item on which the cutting operation is being per- formed. The surfaces of a workpiece are commonly referred to as faces, ends and edges.

ANTI-KICKbACK pAWlS

Device which, when properly maintained, is de- signed to stop the workpiece from being kicked back at the operator during operation.

ARbOR

The shaft on which a cutting tool is mounted.

bEVEl

Blade angle relative to the table surface.

CROSSCUT

A cutting or shaping operation made across the width of the workpiece cutting the workpiece to length.

dAdO

A non-through cut which produces a square sided notch or trough in the workpiece.

fEATHERbOARd

A device which can help guide workpieces during rip type operation by keeping workpiece in contact with

the rip fence. It also helps prevent kickback.

fREEHANd

Performing a cut without a fence, miter gauge, fix- ture, hold down or other proper device to keep the workpiece from twisting during the cut.

gUM

A sticky, sap-based residue from wood products. After it has hardened, it is referred to as “RESIN”.

HEEl

Misalignment of the blade which causes the trailing or outfeed side of the blade to contact the cut sur- face of the workpiece. Heel can cause kickback, binding, excessive force, burning of the workpiece or splintering. In general, heel creates a poor quality cut and can be a safety hazard.

KERf

The space in the workpiece where the material was removed by the blade.

KICKbACK

An uncontrolled grabbing and throwing of the work- piece back toward the front of the saw during a rip type operation.

-7-

GTS1031 specifications

The Bosch Power Tools GTS1031 is a compact job site table saw designed to deliver precision cutting in a portable format. This powerful saw is equipped with a robust 15-amp motor that can easily handle a wide variety of applications, making it an excellent choice for contractors and DIY enthusiasts alike.

One of the standout features of the GTS1031 is its Smart Guard System. This integrated safety feature includes a modular blade guard, riving knife, and anti-kickback pawls. The blade guard helps protect the user from accidental contact with the blade, while the riving knife reduces the risk of kickback during operation. The entire system is designed to be easy to install and adjust, promoting both safety and efficiency on the job.

The GTS1031 boasts a portable, lightweight design that weighs just 52 pounds. This makes it easy to transport, set up, and store. Its foldable stand provides a stable base while offering simple setup and breakdown without the need for additional tools. The compact size of the saw, along with its sturdy construction, makes it extremely convenient for use in tight spaces or on busy job sites.

Another notable characteristic of the GTS1031 is its cutting capacity. With a 10-inch blade, it can make cuts up to 26 inches wide with a depth of 3.5 inches at 90 degrees and 2.5 inches at 45 degrees. The precision machined aluminum table ensures accurate cuts and durability, while the integrated measurements allow for easy adjustments and repeatability.

The saw features an onboard storage system for its accessories, ensuring that everything needed for operation is within arm's reach. This organization helps users stay efficient, reducing downtime during projects. The table saw is also designed for easy blade changes, minimizing interruption and allowing users to switch between different types of blades based on their cutting needs.

With its blend of power, portability, and safety features, the Bosch Power Tools GTS1031 stands out as a reliable choice for both professionals and hobbyists. Its emphasis on precision and user-friendly design makes it an indispensable tool for a wide range of applications, from framing to fine woodworking.

Bosch Power Tools GTS1031 manual Glossary of Terms, Crosscut

Models: GTS1031