! WARNING

BM 2610014415 01-11 E:BM 2610012089 12-10 E 1/10/11 7:17 AM Page 28

REpETITIVE CUTTINg

REPETITIVE CUTTING is known as cutting a quantity of pieces the same length without having to mark each piece (Fig. 45).

When making repetitive cuts from a long workpiece, make sure it is supported.

! WARNING

Never use the rip fence as a length

 

stop because the cutoff piece could

 

bind between the fence and the blade causing a kick- back.

1.When making repetitive cuts, clamp a block of wood 3" long to the table at desired length to act as a length stop.

When clamping the block, make sure that the end of the block is well in

front of the sawblade. Be sure it is clamped securely.

2.Slide the workpiece along the miter gauge until it touches the block … hold it securely.

When using the RIGHT hand groove, hold the work- piece with your right hand and the lock knob with your left hand.

FIG. 46

3.Make the cut … pull the workpiece back … push the cut-off piece off the table with a long Push Stick …

DO NOT ATTEMPT TO PICK IT UP AS THIS COULD ENDANGER YOUR HANDS.

FIG. 45

MITER CUTTINg

MITER CUTTING is known as cutting wood at an angle other than 90° with the edge of the wood. Fol- low the same procedure as you would for crosscut- ting (Fig. 46).

Adjust the miter gauge to the desired angle, and lock it.

The miter gauge may be used in either of the grooves in the table.

When using the miter gauge in the LEFT hand groove, hold the workpiece firmly against the miter gauge head with your left hand, and grip the lock knob with your right hand.

bEVEl CROSSCUTTINg

BEVEL CROSSCUTTING is the same as crosscut- ting except that the wood is also cut at a bevel angle (Fig. 47) … other than 90° with the flat side of the wood.

Adjust the blade to the desired angle.

Use the Miter Gauge in the groove to the RIGHT or the LEFT of the blade.

COMpOUNd MITER CUTTINg

COMPOUND MITER CUTTING is a combination of miter cutting and bevel crosscutting. The cut is made at an angle other than 90° to both the edge and the flat side of the wood (Fig. 47).

Adjust the miter gauge and the blade to the desired angle and make sure miter gauge is locked.

FIG. 47

-28-

Page 27 Page 29
Page 28
Image 28
Bosch Power Tools GTS1031 manual REpETITIVE CUTTINg, BEVEl CROSSCUTTINg, COMpOUNd Miter CUTTINg
Page 27 Page 29

GTS1031 specifications

The Bosch Power Tools GTS1031 is a compact job site table saw designed to deliver precision cutting in a portable format. This powerful saw is equipped with a robust 15-amp motor that can easily handle a wide variety of applications, making it an excellent choice for contractors and DIY enthusiasts alike.

One of the standout features of the GTS1031 is its Smart Guard System. This integrated safety feature includes a modular blade guard, riving knife, and anti-kickback pawls. The blade guard helps protect the user from accidental contact with the blade, while the riving knife reduces the risk of kickback during operation. The entire system is designed to be easy to install and adjust, promoting both safety and efficiency on the job.

The GTS1031 boasts a portable, lightweight design that weighs just 52 pounds. This makes it easy to transport, set up, and store. Its foldable stand provides a stable base while offering simple setup and breakdown without the need for additional tools. The compact size of the saw, along with its sturdy construction, makes it extremely convenient for use in tight spaces or on busy job sites.

Another notable characteristic of the GTS1031 is its cutting capacity. With a 10-inch blade, it can make cuts up to 26 inches wide with a depth of 3.5 inches at 90 degrees and 2.5 inches at 45 degrees. The precision machined aluminum table ensures accurate cuts and durability, while the integrated measurements allow for easy adjustments and repeatability.

The saw features an onboard storage system for its accessories, ensuring that everything needed for operation is within arm's reach. This organization helps users stay efficient, reducing downtime during projects. The table saw is also designed for easy blade changes, minimizing interruption and allowing users to switch between different types of blades based on their cutting needs.

With its blend of power, portability, and safety features, the Bosch Power Tools GTS1031 stands out as a reliable choice for both professionals and hobbyists. Its emphasis on precision and user-friendly design makes it an indispensable tool for a wide range of applications, from framing to fine woodworking.
Top Page Image Contents