Brocade ICX 6650 slot and Ethernet port numbering
•Slot 2 is located on the back of the ICX 6650 device and contains ports 1 through 3 on the top row and port 4 on the bottom row. These ports are 2x40 GbE QSFP+. Refer to the following figure.
Slot 2
Slot 2 Slot 3
•Slot 3 is located on the back of the ICX 6650 device and contains ports 1 through 8. These ports are 4 x 10 GbE breakout ports and require the use of a breakout cable. Refer to the previous figure.
How this document is organized
The document contains the following components:
•Chapter 1, “Brocade ICX 6650 Overview”provides an overview of the Brocade ICX 6650.
•Chapter 2, “Installing the Brocade ICX 6650”provides the information needed to install the switch in your network.
•Chapter 3, “Configuring the Brocade ICX 6650”lays out the tasks and commands necessary to get the switch up and running.
•Chapter 4, “Brocade ICX 6650 Operation”discusses the
•Chapter 5, “Managing the Brocade ICX 6650” describes how to manage temperature settings, remove MAC addresses, and provides procedures for removing and replacing the
•Appendix A, “Brocade ICX 6650 Specifications” provides tables of physical, environmental, and general specifications.
•Appendix B, “Brocade ICX 6650 Regulatory Statements” provides a list of the regulatory statements for safety compliance.
•Appendix C, “Brocade ICX 6650 Cautions and Danger Notices” provides a list of the international caution and danger statements for safety compliance.
xii | Brocade ICX 6650 Hardware Installation Guide |
|
