Brocade Communications Systems 53-1002599-01 manual Post rack mount installation

Installing the device in a rack or cabinet 2

2-Post rack mount installation

NOTE

Use the following procedure when installing the Brocade ICX 6650 device in a 2-post rack. For 4-post racks, follow the procedures in the section “4-Post rack mount installation” on page 14.

Remove the rack mount kit from the shipping carton. The kit contains the following:

•Two L-shaped mounting brackets.

•Sixteen 8-32 x 5/16 in., panhead Phillips screws with patchlocks.

•Four 10-32 x 5/8 in., panhead Phillips screws (torque to 25 in-lb, 29 cm-kg). See item 1 in Figure 7.

•Eight 32-10 retainer nuts (for square-hole rack rails). See item 2 in Figure 7.

•Eight 32-10 retainer nuts (for round-hole rack rails) See item 3 in Figure 7.

FIGURE 7 2-post screws and retainer nuts

1

2

3

Use the following steps to mount devices in a 2-post rack.

1.Attach the mounting brackets to the sides of the device as illustrated in Figure 8 using the 8-32 x 5/16 in. screws.

FIGURE 8 Attaching the brackets for Brocade ICX 6650 devices

Brocade ICX 6650 Hardware Installation Guide	13
53-1002599-01