50 Brocade ICX 6650 Hardware Installation Guide
53-1002599-01
Supported media types
A
Supported media typesThe Brocade ICX 6650 supports the following media types:
•10000BASE-TX SFP, RJ45 (Cat5, 6, Cat6a/7)
•10000BASE-SX SFP
•10000BASE-LX SFP
•SFP+ Direct Attach Copper cable, 10 GbE (1, 3, and 5 meter Twinax)
•10GBASE-USR SFP+ (MMF Ultra-Short Reach)
•10GBASE-SR SFP+ (MMF Short Reach)
•10GBASE-LR SFP+ (SMF10 km Reach)
•40GBASE-SR4 QSFP+ (MTP 1x8 or 1x12), MMF 100 meter
•40GBASE-SR4 QSFP+ (MTP 1x8 or 1x12), MMF 100 meter (10GBASE-SR compatible,
breakout)
•QSFP+ to 4 SFP+ Direct Attach Copper breakout cable (1, 3, and 5 meter)
Pinouts and signallingPinout information for the rear panel mini-USB RJ45 console connector is provided in Table 8.
Memory specificationsThe Brocade ICX 6650 has two types of memory devices: boot flash, and main memory. The size of
each is listed in Table 9 .
TABLE 9 Brocade ICX 6650memory specifications
TABLE 8 Mini-USB serial RJ45 management port pinouts
Pin number Definition Notes
1 +5V Not used
2UART0_TXDebug port
3 UART0_RX Console Port
4INNot used
5GNDGND
Type Size
Boot flash 64MB NOR flash
Main memory - DDR2-400
SDRAM with ECC (RDIMM)
1GB