Remote Commands

Change Fax Forwarding Setting

Press 9 5.

then to Turn feature off press 1. Enter Fax Forwarding press 2.

Program Fax Forward Number press 4. Enter the new number of the remote fax machine where you want your fax messages forwarded, and then press # #. Press 9 6 1 after two short beeps, then enter the number of remote fax machine, and then

## to retrieve Memory Status List. Turn Fax Storage on press 6.

Turn Fax Storage off press 7.

2

Retrieve a Fax

Press 9 6.

then to Print a Memory Status List press 1, then enter the number of remote fax machine, and then # #. After the beep, hang up and wait.

Retrieve all faxes press 2, then enter the number of remote fax machine, and then # #. After the beep, hang up and wait.

Erase all fax messages press 3.

Check the Receiving Status

Press 9 7 1.

1 long beep – Fax message(s)

3 short beeps – no messages

3

Changing Remote Access Code

1Press Menu/Set, 8, 7.

2Enter a three-digit code using number

keys 0-9, and #. Thecannot be changed.

3Press Menu/Set.

4Press Stop/Exit.

Remote Commands

Listen to Voice Messages

Press 9 1.

then to Repeat a message press 1. Skip to next message, press 2. Stop playing the message press 9.

Replace All Voice Messages

Press 9 3. If you hear three beeps, all messages have not yet been heard, and the messages will not be erased.

Play/Record Outgoing Message

Press 9 4.

then to Play Message Centre OGM press 1 1. Play F/T OGM press 1 2.

Play Paging OGM press 1 3.

Record new Message Centre OGM

press 2 1, then speak after beep. press 9 to stop.

Record new F/T OGM press 2 2,

then speak after beep. press 9 to stop.

Record new Paging OGM press 2 3,

then speak after beep. press 9 to stop.

Change Paging/Fax Forwarding Setting

Press 9 5.

then to Turn feature off press 1. Enter Fax Forwarding press 2. Enter Paging press 3.

Progrm Fax Forward Number

press 4. Enter the new number of the remote fax machine where you want your fax messages forwarded, and then press # #. Press 9 6 1 after two short beeps, then enter the number of remote fax machine, and then # # to retrieve Memory Status List.

2

3

4

100