Setting the Music on Hold
You can set the machine to play or not to play the music during the machine is holding a voice call. 1 Press Menu/Set, 1, 6.
2 Press 
or 
to select ON (or OFF), and press Menu/Set when the screen displays your selection.
3 Press Stop/Exit.
Setting the Dialling Mode (Tone/Pulse)
Your machine is initially set to TONE. If you are using a PULSE dial line, you can change the setting to PULSE by following the steps below.
1 Press Menu/Set, 1, 7. The screen prompts you to select TONE or PULSE.
2 Use 
or 
to select the dialling mode, and press Menu/Set when the screen displays the dialling mode you want.
3 Press Stop/Exit.
Although this equipment can use either Pulse or Tone signalling, only the performance of the Tone signalling is subject to regulatory requirements for correct operation. It is therefore strongly recommended that the equipment is set to use the Tone signalling for access to public or private emergency services. The Tone signalling also provides faster call set up.
USE BASIC
Setup 17