Started Getting

Ch. 2 Getting Started

5Type the necessary information into the appropriate boxes (If the information has already been registered in Windows®, it will automatically appear.), and then click the Next button. A dialog box appears, ask- ing for confirmation of the entered informa- tion.

6Click the Yes button to register the entered information.

NOTE

To change the registration information, click the No button, and then return to step 4.

The Choose Destination Location dialog box appears.

7Click the Next button to begin installation.

NOTE

To change the location where P-touch Quick Editor will be installed, click the Browse button, and then select the installation folder in the Choose Folder dialog box that appears. Then, click the OK button.

After P-touch Quick Editor is installed, a dialog box appears, allowing you to select where shortcuts to P-touch Quick Editor will be added.

8Select the desired locations for the short- cuts, and then click the Next button. A dia- log box appears, allowing you to select whether or not to install the printer driver.

To install the printer driver, click the Yes button. The first Driver Setup dialog box appears, allowing you to select whether the P-touch will be connected through the USB port or the RS-232C port.

Continue with the procedure in Installing the USB printer driver on page 16. (To install the serial printer driver, refer to the Advanced Functions booklet.)

NOTE

If the printer driver is already installed, click the No button. A dialog box appears explaining that installation is finished. Select “Yes, I want to restart my computer now.”, click the Finish button to restart the computer, and then remove the CD-ROM from the CD-ROM drive.

Installing the USB printer driver

With Plug-and-Play, new devices connected to the system are detected, and their drivers are automatically installed. If the P-touch 9600/ 3600 is to be connected through the USB port, its driver will be installed with Plug-and-Play. Be sure to read the installation instructions described below before installing the printer driver supplied on the CD-ROM.

NOTE

☞Do not connect the P-touch to the computer until you are instructed to do so, otherwise the printer driver may not be installed correctly.

☞The dialog boxes shown in the procedures below are for the installation of the software for the PT-9600. When installing the software for the PT-3600, the dialog boxes may be slightly different from those shown.

16