ERROR MESSAGE LIST

 

 

 

 

 

 

 

ERROR MESSAGE

 

CAUSE

 

SOLUTION

 

 

 

 

 

 

 

 

 

 

 

INTERFACE ERROR!

●

This message appears if the

Windows

 

 

 

 

 

 

wrong port is selected for a USB

Under “Print to the following

 

 

connection.

port” in the printer Properties

 

 

 

dialog box, select “PTUSB:”

 

 

 

for the USB connection.

 

 

 

 

For Windows 98 and Me:

 

 

 

 

☞

If two or more of the same

 

 

 

 

P-touch model are con-

 

 

 

 

nected through their USB

 

 

 

 

ports, instead of “PTUSB:”,

 

 

 

 

select “PTUSB (PT-3600/

 

 

 

 

9600-XXXXXXXXX):”

 

 

 

 

 

(where XXXXXXXXX is the

 

 

 

 

serial number). The serial

 

 

 

 

number is written above

 

 

 

 

the barcode on the silver

 

 

 

 

label attached to the bot-

 

 

 

 

tom of the P-touch.

 

 

 

 

For Windows 2000 and XP:

 

 

 

☞

The P-touch can be added

 

 

 

 

as a second printer.

 

 

 

 

Macintosh

 

 

 

 

 

 

 

In the Chooser, select the PT-

 

 

 

3600/9600 as the printer.

 

 

 

 

 

 

 

●

This message appears if the

●

Specify correct settings for

 

 

wrong port is selected for a

 

the

BAUDRATE,

BIT

 

 

serial (RS-232C) connection.

 

LENGTH,

PARITY

and

 

 

 

 

BUSY

interface

parame-

 

 

 

 

ters.

 

 

 

 

 

 

 

●

Check

that

the

interface

 

 

 

 

cable is correctly con-

 

 

 

 

nected.

 

 

 

LENGTH LIMIT!

●

This message appears if you try

●

Delete some of the text.

 

 

to print or use the Layout pre-

 

 

 

 

 

 

 

 

view function when the length

 

 

 

 

 

 

 

 

of the text is greater than the 1

 

 

 

 

 

 

 

 

m limit.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

85