Started Getting

Ch. 2 Getting Started

4Double-click the Mac OS 9 folder to open it.

5Double-click the P-touch Quick Editor Installer icon in the folder that appears. The installer starts up.

6Select the installation method.

For a basic installation

Clicking the Install button immediately starts installing the most basic options.

NOTE

About 20 MB of available hard-disk space is needed to begin installation. If enough hard-disk space is available, click the Install button.

For a custom installation

Clicking the Custom Install button dis- plays a dialog box that allows you to select which options to install.

Only the options with a check mark beside them are installed. Select the options that you wish to install, and then click the Install button.

NOTE

In order to print from the P-touch 9600/3600, “PT- 9600/3600 Driver” must be selected for installa- tion.

7When the dialog box appears, indicating that the installation is finished, click the Quit button.

8When the dialog box appears, asking if you wish to restart the computer, click the Restart button to restart the computer.

With Mac OS X v10.1 or v10.2:

1With the P-touch and the Macintosh turned off, connect the P-touch to the computer using the enclosed USB interface cable as described on page 10. Be sure to leave the P-touch turned off.

2Turn on the Macintosh.

3Insert the enclosed CD-ROM into the com- puter’s CD-ROM drive.

4Double-click the Mac OS X folder to open it.

24