To change the HEAD ADJUSTMENT setting:

This function allows you to shift the printing up or down within the tape.

NOTE

This function does not adjust printing on 36-mm- wide tape.

1Hold down dand press A.

NOTE

This step may be skipped if settings for several Setup functions are being applied at the same time.

2Rotate runtil HEAD ADJUSTMENT is dis- played, and then press r (OR press j or k until HEAD ADJUSTMENT is dis- played).

R123456789 ABCDEFK

R

 

 

 

 

 

 

RG 03/05

 

 

 

RH NO

HEAD ADJUSTMENT

 

I L

00

 

 

 

Q

R

M

 

 

 

RJ AUTO

0.4

HELSINKI

A

AUTO

 

Length

Margin

Font

Width

Size

3Rotate r (or press m or g) until the desired setting is displayed.

NOTE

☞To return the function to its default setting (0), press the space bar.

☞To shift the printing down, select a lower value. To shift the printing up, select a higher value.

4Press r(or press n) to apply the setting.

NOTE

If ris used to select the settings, only one function can be set at a time. To apply several Setup settings at the same time, press jor kto select the func- tion, and then press m or g to select the desired setting. Press nonly after the necessary functions have been set.

To change the HALF CUTTER setting:

This function allows you to adjust how deep a half cut is cut with laminated tape, for example, if the tape is cut too much or not enough. Nor- mally, it is only necessary to change the setting by one. If the half cut is still either too deep or not deep enough, change the setting by one again.

Ch. 4 Machine Adjustments

NOTE

If the tape is still not cut correctly even after this setting has been continuously adjusted, the cutter may be dull. Contact your service representative.

1Hold down dand press A.

NOTE

This step may be skipped if settings for several Setup functions are being applied at the same time.

2Rotate runtil HALF CUTTER is displayed, and then press r(OR press jor kuntil HALF CUTTER is displayed).

R123456789 ABCDEFK

R

 

 

 

 

 

 

RG 04/05

 

 

 

RH NO

HALF CUTTER

 

 

I

L

00±3

 

 

Q

R

M

 

 

RJ AUTO

0.4

HELSINKI

A

AUTO

 

Length

Margin

Font

Width

Size

3Rotate r (or press m or g) until the desired setting is displayed.

NOTE

☞To cut less deep, select a lower value. To cut deeper, select a higher value.

☞Adjust the setting in small steps.

☞To return the function to its default setting (0), press the space bar.

4Press r(or press n) to apply the setting.

NOTE

If ris used to select the settings, only one function can be set at a time. To apply several Setup settings at the same time, press jor kto select the func- tion, and then press mor g to select the desired setting. Press nonly after the necessary functions have been set.

Machine Adjustments

81