Since the length of time and amount of pressure that the stamp holder should be held down depends on the amount of ink in the holder, first practise stamping on a piece of scrap paper.
You can expect to use a stamp film holder approximately 300 to 500 times, although some ink is lost when the stamp film is changed. The actual life of the stamp film holder will vary depending on the size and thickness of the char- acters, whether a shading pattern is used, etc.
NOTE
☞After stamping, wait until the ink has com- pletely dried before touching it in order to pre- vent smearing.
☞If the stamp holder is not pressed straight down, the stamp may be blurred.
☞Do not press the stamp holder down too force- fully.
☞Do not stamp on wet, sticky, rough or uneven surfaces. Only stamp on paper. The ink will not dry on plastic overhead projector transparen- cies and other
☞If a stamp made with a new stamp film is faint or incomplete, even after forcefully pressing down the stamp holder for up to 30 seconds, replace the stamp holder with a new one. Do not try to refill the stamp holder.
Ch. 2 Getting Started
Getting Started
39