To move the cursor down to the following line:
●Press gonce.
NOTE
If this key is pressed when the cursor is in the last line of text, the cursor moves to the end of the line.
To move the cursor down several lines:●Hold down guntil the cursor moves to the desired position.
To move the cursor to the end of the entire text:
●Hold down dand press g.
Function dial/Set key (r)The navigation dial in the
●Rotate reither clockwise or counterclock- wise until the desired function or setting is displayed.
NOTE
To return to the text without making a selection, press e.
To apply the selection:●Press r.
Code key (d)To use a function printed in color above or on a key:●Hold down d and press the key for the desired function.
Ch. 3 Functions
Return key (n)The return key can be used to select an item from a list, (for example, when adding a symbol or accented character to the text) or to apply a selected setting.
Some questions asking you to confirm a command may appear on the LCD display, especially when the function that you have chosen will delete or affect files. In these cases, press
nis like answering “yes”.
NOTE
To answer “no”, press e. Refer to Cancel key below.
To select an item from a list or to apply the selected setting:●Press n.
Cancel key (e)The Cancel key can be used to quit most functions and return to the previous display without changing the text.
Some questions asking you to confirm a command may appear on the LCD display, especially when the function that you have chosen will delete or affect files. In these cases, pressing
eis like answering “no”.
NOTE
To answer “yes”, press n. Refer to Return key above.
To quit a function without applying any changes that you may have made:●Press e.
Functions
43