Functions

Ch. 3 Functions

4Press r(OR press n) to apply the setting.

NOTE

If ris used to select the settings, only one function can be set at a time. To apply several format settings at the same time, press jor kto select the function, and then press m or g to select the desired setting. Press n only after the necessary functions have been set.

Line effects function(LINE EFFECTS)

The Line effects function enables you to underline or strike out certain parts of your text.

OFF UNDERLINE STRIKEOUT

When any setting other than OFF is selected for the text at the cursor’s current position, the Line effects indicator at the top of the display comes on.

123456789 ABCDEFK

RH ON <<< P-touch >>>

 

R

L

 

 

 

Q

RI M

 

 

 

 

1:_

 

 

 

 

RJ AUTO

0.4

HELSINKI

A

AUTO

 

Length

Margin

Font

Width

Size

To change the setting for the Line effects function:

1Select GLOBAL FORMAT, BLOCK FOR- MAT or LINE FORMAT (OR hold down d and press 1, 2or 3) as described on pages 52 to 53.

NOTE

This step may be skipped if settings for several format functions are being applied at the same time.

2Rotate r until LINE EFFECTS is displayed, and then press r(OR press jor kuntil LINE EFFECTS is displayed). The setting for the text at the cursor’s current position is shown on the left side of the display and a sample can be seen on the right side.

R123456789 ABCDEFK

R

 

 

 

 

 

RG 06/13

 

 

 

 

 

 

 

 

RH NO LINE EFFECTS

 

 

 

L

 

 

 

 

Q

RI M OFF

 

 

 

RJ AUTO

0.4

HELSINKI

 

A

AUTO

Length

Margin

Font

Width

Size

3Rotate r (OR press m or g) until the desired setting is displayed.

NOTE

☞If “*****” appears as a setting, the Line effects function has already been applied to either a line in the current text block (if the Block format or the Global format function is being set) or a block in the current text (if the Global format function is being set). Changing the setting will cancel the setting that was previously applied.

☞To return the function to its default setting (OFF), press the space bar.

☞To return to the text without changing the for- matting, press e (OR hold down d and press 1, 2or 3).

4Press r(OR press n) to apply the setting.

NOTE

If ris used to select the settings, only one function can be set at a time. To apply several format settings at the same time, press jor kto select the function, and then press m or g to select the desired setting. Press n only after the necessary functions have been set.

Frame function (FRAME)

With the Frame function, you can choose from a variety of frames and highlights for emphasising certain parts or all of the text in your label. For samples of the available frame settings, refer to page 104. When any setting other than OFF is selected for the text at the cursor’s current posi- tion, the Frame indicator at the top of the display comes on. The lines on the right side of the indicator, starting from the top, show if the Frame setting is applied to the entire text, the block or the line.

58