Adjustments Machine

Ch. 4 Machine Adjustments

Machine adjustments

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

Setup functions (d+ A)

Various functions are available for changing the general appearance of how text is shown on the display and for adjusting the operation of the P-touch.

To change the CONTRAST setting:

The CONTRAST function enables you to make the LCD display lighter or darker.

1Hold down dand press A.

NOTE

This step may be skipped if settings for several Setup functions are being applied at the same time.

2Rotate r until CONTRAST is displayed, and then press r(OR press jor kuntil CONTRAST is displayed).

R123456789 ABCDEFK

R

 

 

 

 

 

 

RG 01/05

 

 

 

RH NO

CONTRAST

 

 

I L

00

 

 

 

Q

R

M

 

 

 

RJ AUTO

0.4

HELSINKI

A

AUTO

 

Length

Margin

Font

Width

Size

3Rotate r (or press m or g) until the desired setting is displayed.

NOTE

To return the function to its default setting (0), press the space bar.

4Press r(or press n) to apply the setting.

NOTE

If ris used to select the settings, only one function can be set at a time. To apply several Setup settings at the same time, press jor kto select the func- tion, and then press m or g to select the desired setting. Press nonly after the necessary functions have been set.

To change the TAPE LENGTH ADJUST setting:

When printing a label with a specified length (Tape length function), the length of the printed label may be slightly different. This function allows you to adjust the length of the printed label.

NOTE

If the tape length cannot be adjusted satisfactorily using this function, small adjustments can be made to the tape length using the Tape length function.

1Hold down dand press A.

NOTE

This step may be skipped if settings for several Setup functions are being applied at the same time.

2Rotate r until TAPE LENGTH ADJUST is displayed, and then press r (OR press j or k until TAPE LENGTH ADJUST is dis- played).

R123456789 ABCDEFK

R

 

 

 

 

 

 

RG 02/05

 

 

 

RH NO

TAPE LENGTH ADJUST

 

I L

00

 

 

 

Q

R

M

 

 

 

RJ AUTO

0.4

HELSINKI

A

AUTO

 

Length

Margin

Font

Width

Size

3Rotate r (or press m or g) until the desired setting is displayed.

NOTE

☞To return the function to its default setting (0), press the space bar.

☞To decrease the label length, select a lower value. To increase the label length, select a higher value.

4Press r(or press n) to apply the setting.

NOTE

If ris used to select the settings, only one function can be set at a time. To apply several Setup settings at the same time, press jor kto select the func- tion, and then press mor gto select the desired setting. Press nonly after the necessary functions have been set.

80