6 - 2 Setup Send

Fax Redial

If you are sending a fax manually and the line is busy, press
Redial/Pause, and then pr ess Fax Start to try again. If you want
to make a second ca ll to the las t number dial ed, you can s ave time
by pressing Redial/Pause and Fax Start.
Redial/Pause only works if you dialed from the control panel.
If you are sending a fax automatica lly and the line is busy, the fa x
machine will automatically re dial one time after five minutes.
How to fax

Automatic transmission

This is the easiest way to send a fax. Documents must be between
5.8 and 23.7 inches (150 and 600 mm) long and between 5.9 and
8.5 inches (148 and 210 mm) wide.
IMPORTANT: Do not pick up the handset or press Hook.
1
Insert the document face down, top edge fi rst in the Automatic
Document Feeder (ADF ).
2
Adjust the paper guides to fit the width of your document.
3
Enter the fax number using One-Touch, Speed-Dial, Search
or the dial pad. (See One-Touch dialing on page 6-1,
Speed-Dialing on page 6-1 and Search on page 6-1.)
4
Press Fax Start.
Do not use paper that is curled, wrinkled, f olded, ripped,
stapled, paper clipped, pasted, or taped.
Do not use cardboard, ne wspaper or fabric.
The ADF can hold up to 10 pages, feeding each one
individually through the fax machine. Use stan dard 17 lb-24 lb
(64 g/m2-90 g/m2) paper when using the ADF; if you are using
heavier paper, feed each sheet individually to prevent paper
jams.
Paper Guides