c Lift the paper tray cover and remove anything that is stuck inside the paper tray.

d Wipe the inside and outside of the paper tray with a dry, lint-free soft cloth to remove dust.

e Close the output paper tray and put the paper tray firmly back in the machine.

Troubleshooting and Routine Maintenance

Cleaning the scanner glass

a Lift the document cover (1). Clean the scanner glass (2) and the white plastic (3) with a soft lint-free cloth moistened with a non-flammable glass cleaner.

1

3

2

b (MFC-295CN only)

In the ADF unit, clean the white bar (1) and the glass strip (2) with a soft, lint-free cloth moistened with a non-flammable glass cleaner.

1

2

Note

In addition to cleaning the scanner glass and glass strip with a non-flammable glass cleaner, run your finger tip over the

scanner glass and glass strip to see if you B can feel anything on it. If you feel dirt or debris, clean the scanner glass and glass strip again concentrating on that area. You may need to repeat the cleaning process three or four times. To test, make a copy after each cleaning attempt.

123

Page 133
Image 133
Brother MFC-253CW manual Cleaning the scanner glass, 123