Brother MFC-253CW manual Sending a Fax, Entering Fax mode, Faxing from the ADF MFC-295CN only

5

Sending a Fax

Entering Fax mode

Press (Fax) to enter fax mode.

Faxing from the ADF (MFC-295CN only)

a Make sure you are in Fax mode .

b Place the document face down in the ADF.

(See Using the ADF (MFC-295CN only) on page 18.)

c Enter the fax number using the dial pad, Speed Dial or Search.

d Press Mono Start or Colour Start.

Note

•To cancel, press Stop/Exit.

•If you send a mono fax while the memory is full it will be sent in real time.

Faxing from the scanner glass

You can use the scanner glass to fax pages of a book one at a time. The documents can be up to Letter or A4 size.

You cannot send colour faxes with multiple pages.

Note

(MFC-295CN only)

Since you can only scan one page at a time, it is easier to use the ADF if you are sending a multiple page document.

a Make sure you are in Fax mode .

b Place your document face down on the scanner glass.

c Enter the fax number using the dial pad, Speed Dial or Search.

d Press Mono Start or Colour Start.

„If you press Mono Start, the machine starts scanning the first page. Go to step e.

„If you press Colour Start, the machine starts sending the document.

e When the LCD asks you Next Page? do one of the following:

„To send a single page, press 2 to choose No(Dial) (or press Mono Start again).

The machine starts sending the document.

„To send more than one page, press 1 to choose Yes and go to step f.

28