2 Getting started

Initial Setup

Setting the Date and Time

When the MFC is not in use it will display the date and time. If you set up the Station ID the date and time displayed by your MFC will be printed on every fax you send. If there is a power failure, you may have to reset the date and time. No other settings will be affected.

1

2

3

4

5

Press Menu/Set, 0, 2.

Initial Setup

Enter the last two digits of the year.

2.Date/Time

Press Menu/Set.

 

Enter two digits for the month.

 

Press Menu/Set.

 

(For example, enter 09 for September, or 10 for October.)

Enter two digits for the day.

Press Menu/Set. (For example, enter 06 for 6th.) Enter the time in 24-Hour format.

Press Menu/Set. (For example, enter 15:25 for 3:25 P.M.)

6 Press Stop/Exit.

The LCD now shows the date and time whenever the MFC is in Fax mode.

Setting Tone and Pulse dialing mode

1

2

3

Press Menu/Set, 0, 4.

Initial Setup

Press ▲ or ▼ to select Pulse (or

4.Tone/Pulse

Tone).

 

Press Menu/Set.

 

Press Stop/Exit.

 

GETTING STARTED 2 - 1