Turning off Remote Fax Options

If you set the Remote Fax Options to Off and there are faxes in your MFC’s memory, the LCD will give you two options.

■If you press 1, all unprinted faxes will be printed and erased before the setting turns off. If a backup copy has already been printed it will not be printed again.

■If you press 2, the memory will not be erased and the setting will be unchanged.

(See Printing a fax from the memory on page 4-5.)

Setting your Remote Access Code

The remote access code lets you access the Remote Retrieval features when you are away from your MFC. Before you use the remote access and retrieval features, you have to set up your own code. The default code is inactive code (--- ).

1

2

Press Menu/Set, 2, 5, 2.

Remote Fax Opt

Enter a three-digit code using

2.Remote Access

numbers 0-9or

 

.

 

 

 

Press Menu/Set. (The preset ‘ ’ cannot be changed.)

Do not use the same code which is set in your Fax Receive Code ( 51) or Telephone Answer Code (#51).

(See Operation from extension telephones on page A-7.)

3 Press Stop/Exit.

You can change your code at any time by entering a new one. If you want to make your code inactive, press Stop/Exit in Step 2 to restore the inactive setting (--- ).

REMOTE FAX OPTIONS 6 - 4