Brother MFC 7300C owner manual

Computer Requirements

The following are the minimum computer requirements you need to set up and operate the MFC drivers.

		COMPUTER REQUIREMENTS
Windows®		Speed			HD	CD-ROM
Operating			RAM
		(or Higher)		Space		Speed
System
95, 98, 98SE	Pentium 75MHz		24MB (32MB rec.)	50MB		2X
NT 4.0	Pentium 75MHz		32MB (64MB rec.)	50MB		2X
Workstation
2000	Pentium 133MHz		64MB (128MB rec.)	50MB		2X
Professional
ME	Pentium 150MHz		32MB (64MB rec.)	50MB		2X

Use only a shielded parallel interface cable that is IEEE-1284 compliant and/or a USB cable that is no longer than 6 feet long (1.8 meters).

Using a bi-directional IEEE-1284 compliant parallel cable to Connect the MFC to the PC (Using Windows® 95, 98, 98SE, ME, Windows NT® Workstation Version 4.0 and Windows® 2000 Professional)

IMPORTANT

Note

Note

To install the software using Windows NT® Workstation Version 4.0 or Windows® 2000 Professional, you must be logged on as the Administrator.

Before you can connect the MFC to your computer, you must purchase a bi-directional IEEE-1284 compliant parallel cable that is no longer than 6 feet (1.8 meters).

If you are using USB cable, see Using a USB cable to Connect the MFC to the PC on page 14-17.

Notice to PC User

A small filter core and cable tie are enclosed in the vinyl bag with your MFC. PLEASE SAVE THESE PARTS. You will need them in the future if you connect the MFC with a Personal Computer. And for optimal performance, use a bi-directional parallel cable with the enclosed Filter core and Cable tie.

14 - 2 S E T T I N G U P T H E M F C A N D P C T O W O R K T O G E T H E R