Brother MFC 7300C owner manual Temporary Copy Settings, Using Enlarge/Reduce Key

50% or 25% of the original size

Memory Full Message

If the memory becomes full while you are making copies, the screen displays a message:

MEMORY FULL P.01

COPY TO COPY

STOP TO ABORT

If the MEMORY FULL message

appears while you are scanning the first page of your original, press Stop to cancel. You will need to clear some faxes from memory before you can continue. If you were scanning subsequent page(s), press Mono Copy or Color Copy to print the scanned pages— OR—Press Stop to cancel.

Note To gain extra memory, you can turn off Fax Storage (see page 9-2).

— OR—Print fax messages in memory (see page 6-6).

Temporary Copy Settings

You can improve your copies by using the Copy
keys: Enlarge/Reduce, Quality and
Options. These setting are temporary, and the
MFC returns to its default settings when you
finish copying. You can try different	r
combinations of settings for best results.

After you press Mono Copy or Color Copy you can use Enlarge/Reduce,

Quality and Options to try different combinations of settings for best results.

Using Enlarge/Reduce Key

1Place the original face down in the ADF.

2	Press Enlarge/Reduce.	ELG/RDC:100%
3	Press or to choose an	THEN COPY OR	SET

enlargement or reduction ratio and press Set.

You can reduce to 93%, 87%, 75%,

— OR—

You can enlarge to 120%, 125%, 150%, 200% or 400%

— OR—

For more choices select ZOOM and press Set. Use the dial pad to enter any percentage between 25% and 400%. For example, press 5, 3 to enter 53%.

4Press Mono Copy or Color Copy.

5Using the dial pad, enter the number of copies and press Set.

— OR—

To accept the default (01), press Set.

M A K I N G C O P I E S 11 - 2