Brother MFC 7300C 5Initial Setup, Getting Started, Setting Date and Time, Setting Station ID

5 5Initial Setup

Getting Started

Setting Date and Time

	Your MFC displays the date and time, and prints it on every fax you send.
	In the event of a power failure, you may have to reset the date and time. All other
	settings remain unaffected.
1	Press Function, 1, 1, 1.	YEAR:XX
2	Enter the last two digits of the year	MONTH:XX
	and press Set.
3	Enter two digits for the month (for	DAY:XX
	example, enter 09 for September, or 10
	for October) and press Set.
4	Enter two digits for the day (for example,	TIME:XX:XX

06) and press Set.

5Enter the time in 24-hour format (for example, enter 15:25 for 3:25 PM) and press Set.

6Press Stop.

The LCD now displays the date and time you set, and displays it whenever the MFC is in Standby mode.

Setting Station ID

You can store your name, fax number, and telephone number to be printed on all fax pages that you send. (See Composing Electronic Cover Page, page 7-6.)

1Press Function, 1, 1, 2.

2Enter your fax number (up to 20 digits) and press Set. You must enter a fax number to proceed.

FAX:

TEL:

3Enter your telephone number (up to 20 digits) and press Set.

If your telephone number and fax number are the same, enter the same number again.

The telephone number you enter is used only for Call Back Message and Cover Page features.

4 Use the dial pad to enter your name (up to	NAME:
20 characters) , and press Set.
(See Entering Text, page 5-2.)

I N I T I A L S E T U P 5 - 1