Brother MFC 7300C owner manual Simultaneous Printing/Fax, Loading Paper

Loading Paper

You can use plain paper, coated paper, transparencies, glossy paper, envelopes and organizer (K, L) in the multi-purpose sheet feeder. (See Chapter 3 for more information about paper types.)

1Open the control panel cover by pulling it toward, you then lift the top cover toward the back. When you want to print on regular paper, keep the purple paper thickness adjustment lever up. When you want to use thick paper, press the lever down. Then, close the top cover and the control panel cover.

(For regular paper)

(For thick paper)

Purple Paper

Thickness Adjustment

Lever

2Remove any paper in the Feeder, and load the new paper. Fan the stack of paper before loading.

3Load the paper stack with the printing (coated) side facing up. Adjust the paper

guide. Make sure the paper is stacked below the arrow. You can load up to approximately 100 sheets of 20 lb (75g/m2) plain paper.

Note If you see ink smudges on the top center of the printed pages, press the purple thickness adjustment lever down.

Simultaneous Printing/Fax

Your MFC can print data from your computer while sending or receiving a fax, or while scanning information into the computer. However, when the MFC is copying or receiving a fax on paper, it pauses the PC printing operation, and resumes when copying or fax receiving is complete. Fax sending will continue during PC printing.

U S I N G T H E M F C A S A P R I N T E R 15 - 3