КРАТКОЕ ТЕХНИЧЕСКОЕ ОПИСАНИЕ МАШИНЫ
KENNENLERNEN | KNOWINGYOUR |
IHRERMASCHINE | SEWINGMACHINE |
4 3 2
1
*5
9
68
7
0
A
B E F C D
G
PRINCIPAL PARTS
1BOBBIN WINDER (Page 28)
Winds the thread onto the bobbin to be used for the lower thread.
2STITCH LENGTH DIAL (Page 13, 24) Controls the length of the stitches.
3SPOOL PIN AND SPOOL CAP (Page 28, 33)
4UPPER TENSION CONTROL DIAL (Page 38) Controls the tension of the upper thread.
5BUTTONHOLE LEVER (Page 55)
*Not available on models
6FLAT BED ATTACHMENT WITH ACCESSORY COMPART- MENT (Page 12, 27)
7ZIGZAG PRESSER FOOT (Page 3, 11)
8REVERSE SEWING LEVER (Page 26) Push for stitching in the reverse direction.
9PATTERN INDICATION WINDOW (Page 13) Shows the stitch number to be performed.
:HOLE FOR VERTICAL SPOOL PIN (Page 37)
Used to hold a second spool of thread for twin needle sewing.
ABALANCE WHEEL
BPATTERN SELECTION DIAL (Page 13)
Turn in either direction to select the desired stitch.
CMAIN POWER/SEWING LIGHT SWITCH (Page 7) Turn on/off the main power/sewing light switch.
DFOOT CONTROLLER JACK (Page 5)
Insert the foot controller plug for operation and connect the machine to the power supply.
EBUTTONHOLE FINE ADJUSTMENT SCREW (Page 61)
FPRESSER FOOT LEVER (Page 33)
GFOOT CONTROLLER (Page 8)
Used to control sewing speed/start and stop.
1
