Cabletron Systems 2200 manual Unpacking the Device, Installing Options

Unpacking the Device

3.1UNPACKING THE DEVICE

Unpack the device as follows:

1.Open the box and remove the packing material protecting the 2E253-49R.

2.Verify the contents of the carton as listed in Table 3-1.

Table 3-1 Contents of 2E253-49R Carton

Item	Quantity
2E253-49R	1
Antistatic Wrist Strap	1
Console Cable Kit	1
RJ21 Angle Adapter	4
Rackmount Kit	1
Strain-Relief Bracket	1
Manual Accessory Kit	1
Power Cord	2

3.Remove the tape seal on the non-conductive bag to remove the 2E253-49R.

4.Perform a visual inspection of the device for any signs of physical damage. Contact Cabletron Systems if there are any signs of damage. Refer to Section 1.2 for details.

3.2INSTALLING OPTIONS

NOTE

Install any optional equipment before proceeding to Section 3.3.

If the 2E253-49R is to be installed with an optional HSIM or VHSIM, refer to the user’s guide of that device for the installation instructions. To install an optional SIMM, refer to Appendix B.

3-2Installation