Cabletron Systems 1082 Interface Configuration Table, Contact Status, Application Tools Guide

C o n f i g u r a t i o n V i e w s

This view (Figure 15) provides status and configuration information about the device as a whole as well as on a port-by-port basis. Fields and Column heading with the Device Configuration view and its subviews are explained in further detail in the SPECTRUM Views documentation.

Contact Status

Indicates whether a connection has been established with the module.

Component

Table

Accesses the Community Name view. For information on using the Community Name view, refer to SPECTRUM Portable Management

Application Tools Guide.

Download Application

Accesses the TFTP DownLoad dialog box, which lets you upgrade firmware for the module from the TFTP Boot or Bootp Server. For more information, refer to SPECTRUM Portable Management Application Tools Guide.

D e v i c e C o n f i g u r a t i o n V i e w

Trap

Table

Opens a dialog box that lets you set up your workstation to be notified of traps received and sent by a module.

Interface Configuration Table

This section of the Device Configuration views provides the following information:

Number of Interfaces

The number of interfaces available from the module.

Index

The numerical value identifying the port.

Type

The type of hardware interface for the port.

Phy Address

The MAC address of the port.

Max Frame Size

The maximum frame size for the module.

Oper Status

The current operational state of the port (Up, Down, or Testing).

S p e c t r u m E n t e r p r i s e M a n a g e r Page 48 S m a r t S w i t c h 6 0 0 0