M o d e l i n g
7See Positioning the Chassis Device Icon, below, to properly locate the automatically created chassis Device icon.
Positioning the Chassis Device Icon
Some of the modeling procedures described above automatically create a chassis Device icon. This icon can be copied into a Room Location view.
1Create a Room Location view using Steps 1 through 10 in Modeling Using the Chassis IP (page 63).
2To locate the chassis Device icon, activate the Topology view and select View > New View > Find.
3Copy the chassis Device icon into the Room Location view as follows:
a Within the Find view, select File > Edit. b Select 6C105.
c From the Edit menu, select Copy.
d Access the Room Location view and select File > Edit to enter the Edit mode.
e Select Paste.
The icon appears in the Room Location view.
M o d e l i n g U s i n g t h e C h a s s i s I P
fExit the Edit mode.
S p e c t r u m E n t e r p r i s e M a n a g e r | Page 66 | S m a r t S w i t c h 6 0 0 0 |
