Cabletron Systems SM-CSI1076, 1088 Receive Size, Encaps Type, VCL CC Cross Connect Id, Row Status

A p p l i c a t i o n s V i e w

CPCS SDU size in octets that is supported on the transmit direction of this VCC.

Receive Size

This field is used when the local VCL endpoint is also the VCC endpoint and AAL5 is used. It indicates the maximum AAL5 CPCS SDU size in octets that is supported on the receive direction of this VCC.

Encaps Type

An instance of this field only exists when the local VCL endpoint is also the VCC endpoint and AAL5 is in use. The field indicates the type of data encapsulation used over the AAL5 SSCS layer. (Reference RFC 1483, Multiprotocol Encapsulation over ATM AAL5, and the ATM Forum LAN Emulation specification.)

VCL CC (Cross Connect) Id

This field is implemented only for a VCL that is cross-connected to other VCLs that belong to the same VCC. All such associated VCLs have the same value as this field, and all their cross- connections are identified by entries in the Cross Connect Table for which VCL CC Id has the same value. The value of this field is initialized after the associated entries in the Cross Connect Table have been created.

A T M C l i e n t A p p l i c a t i o n

Row Status

This field is used to create, delete, or modify a row in this table. To create a new VCL, this field is initially set to “createAndWait” or “createAndGo.” This field must not be set to “active” unless the following columnar fields exist in this row:

•RTD Index

•XTD Index

•AAL Type (if the local VCL endpoint is also the VCC endpoint)

•Transmit Size (for AAL5 connections only)

•Receive Size (for AAL5 connections only)

•Encaps Type (for AAL5 connections only)

The Community Name field in the

Communication Information panel of the

Note:t : Model Information view must be set to “private” in order to change the fields in

the table views.

To make a change to the rows in the table view, do the following:

1In the Communication Information panel, change the Community Name field to “private.”

2From the Icon Subviews menu, select Table View.

S p e c t r u m E n t e r p r i s e M a n a g e r Page 43 S m a r t S w i t c h 6 0 0 0