A p p l i c a t i o n s V i e w
3Set the path information for the row you wish to create, change, or remove.
4Press Return and click OK.
5To create or change a row, click the Create button, change the applicable fields in the Change view and click the right mouse button. Click OK.
6Click the Validate Row button and return to the application table view to see the change.
7To remove a row, highlight it, click the Remove button, and then the Update button.
The row will then be removed from the table view.
Virtual Channel Link View
Access: From the Icon Subviews of the ATM Application icon, select Virtual Channel Link.
Interface
Displays the interface index for this VPI and VCI.
VPI (Virtual Path Identifier)
Displays the VPI value of the VCL. The maximum VPI value cannot exceed the value allowable by the Interface MaxVPI Bits.
A T M C l i e n t A p p l i c a t i o n
VCI (Virtual Channel Identifier)
Displays the VCI value of the VCL. The maximum VCI value cannot exceed the value allowable by the Interface MaxVCI Bits.
Admin Status
Implemented only for a VCL that terminates a VCC (i.e., one that is not
Oper Status
Indicates the current operational status of the VCL. “Up” and “Down” indicate that the VCL is operational or not operational, respectively.
Unknown indicates that the status of this VCL cannot be determined.
Row Status
Used to create, delete or modify a row in this table. To create a new VCL, this field is initially set to “createAndWait” or “createAndGo”. This field must not be set to “active” unless the following columnar fields exist in this row:
•RTD Index
•XTD Index
•AAL Type (if the local VCL endpoint is also the VCC endpoint)
•Transmit Size (for AAL5 connections only)
S p e c t r u m E n t e r p r i s e M a n a g e r | Page 44 | S m a r t S w i t c h 6 0 0 0 |
