Canon DU7-1175-000 service manual Paper Enterance

Step 7: Unhook spring from the Docking Plate (D) and Door. Remove the “4” screws that secure the Docking Bracket. Remove, and set aside.

PAPER ENTERANCE	FRONT DOOR
SIDE	SIDE

PAPER EXIT

SIDE

Step 8: To remove the Rear Aligner, Idler Paper Guide Assembly

A.Remove “2” E-Rings from the Pivot Shaft.

B.Slide the Shaft all the way out through the front of the Professional Puncher-A1.

C.Remove the “2” Nylon Bearings.

D.Remove and set aside the Rear Aligner, Idler Paper Guide Assembly.

Step 9: To remove the curved sheet metal Exit Paper Guide Assembly

A. Remove the “4” Screws (2 rear and 2 front) of the curved sheet metal Exit Paper Guide Assembly

B.Unplug the Sensor

C.Pull the entire sheet metal Exit Paper Guide Assembly out, set aside.

23