BINDER SIDE
A
Step 5: To remove the Rear Cabinet/Cover (B) of the Professional
1.Remove the 5 screws on Exit side and 2 screws on Entrance side.
2.Slide the Rear Sheet Metal Cabinet/Cover off of the Professional
NOTE: You do not need to lift upward and you do not need to remove the Top Cover.
B
Step 6: To remove the J2 Flipper (C), Door Latch.
A. Remove only one (the one closest to the frame) of the “E” Rings of the J2 Flipper on the right end (front Door side).
B. Push the J2 Flipper in toward the front Door until it clears the rear frame.
C. Pull the entire J2 Flipper, Door Latch out and set it aside.
22
