8.5” x 11” (LEF) Only:
Professional Puncher-A1 is designed to punch this size only (LEF) no exceptions. Attempting to punch a sheet size other than 8.5” x 11” (LEF) will cause a jam.
•Professional Puncher-A1 cannot punch tabs. Tabs will have to be run, punched and inserted offline.
•Use a colored sheet insert (instead of the tab) in the job workflow for easier tab insertion after the job has been run.
Die Sets:
The CANON Professional Puncher-A1 is capable of punching a variety of hole-punch patterns by simply changing the Die Set. Die sets can be changed in seconds without tools. The Die Sets currently available are listed below:
North America (Letter) | | Europe (A4) |
| | |
3-hole | | 4-hole / 2hole |
| |
Velo Bind 11-hole | Velo Bind 12-hole |
| |
CombBind 19-hole | CombBind 20 or 21 |
| |
Wire Bind (2 types) Square | Wire Bind (2 types) Round |
- | 21-hole Wire Bind | - | 23-hole Wire Bind |
- | 32-hole Wire Bind | - | 34-hole Wire Bind |
| |
Color coil 44-hole (2 types) | Color Coil 47 hole (2 types) |
- | 44-hole RND | - | 47-hole – RND |
- | 44-hole Oval | - | 47-hole – Oval |
| | | |
Punch Pattern Samples (North America – Letter Shown)
4
