Redialling when the line is busy

Manual redialling

Press [Redial/Pause] to dial the last number you dialled with the numeric buttons. (This starts redialling regardless of whether automatic redialling is enabled.)

Cancelling manual redialling

To cancel manual redialling, press [Stop]. The fax will feed out the document. See Removing a jammed document from the machine, p. 45.

Automatic redialling

What is automatic redialling?

When you are sending a document and the receiving party’s line is busy, the fax waits the specified time and then dials the same number again. You can set the fax to redial several times if previous attempts fail because of a busy signal.

Cancelling automatic redialling

1 Press [Stop].

If you want to cancel a memory-sending transmission while the fax is waiting to redial, you will have to delete the document from memory (see p. 35).

Setting the options for automatic redialling

You can set the following options for automatic redialling:

Whether or not the fax redials automatically.

The number of times the fax attempts to redial.

The time interval between redialling attempts.

1Press [Function], then press [Start/Copy].

2Use [ ] or [ ] to select <TX SETTINGS>, then press [Start/Copy].

3Use [ ] or [ ] to select <AUTO REDIAL>, then press [Start/Copy].

• To disable automatic redialling, use [ ] or [ ] to select <OFF>, then press [Start/

ON

Copy]. Press [Stop] to return to standby mode.

 

To enable automatic redialling, use [ ] or [ ] to select <ON> and continue with the steps below.

4 Press [Start/Copy] twice.

2TIMES

5

SENDING DOCUMENTS

31

Page 31
Image 31
Canon FAX-TT250 manual Redialling when the line is busy, Manual redialling, Automatic redialling