Registering coded speed dialling numbers and names

Use coded speed dialling to dial a fax number at the press of three buttons. A fax/telephone number can be registered under each two-digit speed dialling code. You can also register the name of the party; the name appears on the printout of the coded speed dialling list.

1

Press [Function].

2

Use [

] or [

] to select <TEL REGISTRATION>, then press [Start/Copy].

3 Use [ ] or [ ] to select <CODED SPEED DIAL>, then press [Start/Copy].

01=

4Use [ ] or [ ] to select the two-digit code (01-30) under which you want to register the number.

If a number is already registered under this coded speed dialling code, the number is displayed on the LCD.*

5Enter the party’s number and name the same way you registered them for one-touch speed dialling.

See steps 4 to 5, Registering one-touch speed dialling numbers and names, p. 22.

6To assign additional coded speed dialling numbers, start from step 4. To finish, press [Stop].

*To delete the name and number registered under the coded speed dialling code, press [Clear] and [Start/Copy] after you perform steps 1 to 4 above.

2

PREPARING TO USE YOUR FAX

23

Page 23
Image 23
Canon FAX-TT250 manual Registering coded speed dialling numbers and names