Canon HF M300, HFM32, HF M31 Uploading your Videos Wirelessly, 140 Š External Connections

IMPORTANT

•While the camcorder is connected to the computer, do not open the memory card slot cover and do not remove the memory card.

•Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss.

-Do not open the memory card slot cover.

-Do not disconnect the USB cable.

-Do not disconnect the compact power adapter or turn off the camcorder or the computer.

Uploading your Videos Wirelessly

If you are using an Eye-Fi card, you can automatically upload the mov- ies from the [For Web Upload] index screen to your favorite video shar- ing Web site. You will need to have installed the software supplied with your Eye-Fi card and completed all the required configuration setup in advance. Refer to the instruction manual of the Eye-Fi card.

Please read the IMPORTANT section (0141) before using an Eye-Fi card.

1Insert your Eye-Fi card into the camcorder and make sure there is sufficient available space on the memory card.

2Convert the desired movies (0137).

•When the conversion is completed, touch [End Without Connecting].

•If you are within the range of a configured network, Web upload will start automatically.

•The status of the wireless communication is shown by the Eye-Fi icon as follows:

-g(grayed out) Communication not established

-g(white, flashing) Connecting; g(white, continuously on) Wireless upload on standby

-g(animated) Wireless upload in progress

-i[Eye-Fi Communication] is set to [BOff]

-hWireless upload stopped by the camcorder (0168)

-oError reading from the Eye-Fi card (0167)

140 Š External Connections