To display the audio level indicator

Usually, the audio level indicator will be displayed only after activating the manual adjustment of the audio recording level. You can choose to display it also when the audio level is adjusted automatically.

[FUNC.] 8[c Mic. Level] 8[z Automatic] 8 [Audio Level Indicator] 8[a]

NOTES

When the audio level meter reaches the red point (0 dB), the sound may be distorted.

If the audio level is too high and the sound gets distorted, activate the microphone attenuator with the 78[Microphone Attenuator] set- ting.

We recommend using headphones to check the sound level while adjusting the audio recording level or when the microphone attenuator is activated.

Using Headphones

Use headphones for playback or to check the audio level while record- ing. The headphones are connected to the AV OUT/Xterminal, which is used for both the headphones and the audio/video output. Before connecting the headphones, follow the procedure below to change the function of the terminal from AV output to X(headphones) output.

Operating modes:

*

*Headphones can be used also in mode but the function of the terminal can- not be changed in this mode. Change the setting in advance in one of the other operating modes.

78 Š Video

Page 78
Image 78
Canon HFM32, HF M31, HF M300 instruction manual Using Headphones, To display the audio level indicator, 78 Š Video